Limpiadores secundarios


Installed at the point where the belt is leaving the discharge pulley, secondary belt cleaners remove residual fines that remain on the belt past the primary belt cleaner. Its location is typically close enough to the material trajectory that the cleanings will return to the main material stream.

Additional tertiary belt cleaners can be installed to provide final cleaning. These cleaners can be the same model as the secondary belt cleaner, or of a different design to allow efficient cleaning and maintenance within the available space.

As these belt cleaners are typically installed away from the pulley, they should be placed at or near a point where the belt is against a roller. Firm support prevents the cleaning pressure from raising the belt line and reducing cleaning efficiency.

Soluciones para la limpieza de bandas Martin®Soluciones para la limpieza de bandas Martin®Soluciones para la limpieza de bandas Martin®

Contáctenos!

+(51-1) 660-4315
Productos 100% Garantizados
Si envía este formulario, acepta la política de privacidad de Mollom.

Producto Velocidad máx. de la banda Ancho máx. de la banda
1500 ppm (7.5 m/s)
1500 ppm (7.5 m/s)
1500 ppm (7.5 m/s)
1000 ppm (5.1 m/s) Hasta 96 pulgadas (hasta 2400 mm)
1200 ppm (6.1 m/s) Hasta 126 pulgadas (hasta 3200 mm)
1200 ppm (6.1 m/s) Hasta 126 pulgadas (hasta 3200 mm)
1000 ppm (5.1 m/s) Hasta 96 pulgadas (hasta 2400 mm)